60MHz频宽,4输入通道,
1GSa/s 即时取样率以及 25GSa/s 等效取样率
25000点之记忆体长度
5.6 吋 TFT 彩色 LCD 荧幕
支援USB HOST/DEVICE：支持USB存储卡(U盘),USB 印表机
支援AC/DC电源操作模式（选购）,高容量電池模組,可提供連續4小時操作(选购)规格 VERTICAL | | Channels | 4 | | Bandwidth | DC ~ 60MHz(-3dB) | | RiseTime | 5.8ns Approx. | | Sensitivity | 2mV/div ~ 5V/div (1-2-5increments) | Accuracy
| ∮(3% x |Readout|+0.05 div xVolts/div+0.8mV) | | InputCoupling | AC, DC & Ground | Input Impedance
| 1M∮2%, ~16pF | | Polarity | Normal & Invert | Maximum Input
| 300V (DC+AC peak), CATII | | Waveform SignalProcess | + , - , FFT | Offset Range
| 2mV/div ~ 20mV/div : 0.5V ;50mV/div ~ 200mV/div : 5V ; 500mV/div ~ 2V/div : 50V ; 5V/div :300V | | BandwidthLimit | 20MHz (-3dB) | TRIGGER | | Sources | CH1 , CH2 , CH3 , CH4, Line | Modes
| Auto-Level, AUTO,NORMAL, SINGLE, TV, Edge | | Coupling | AC , DC , LF rej. , HF rej. ,Noise rej. | | Sensitivity | DC ~ 25MHz : Approx. 0.5div or5mV
25MHz ~ 60MHz : Approx. 1div or 10mV | HORIZONTAL | | Range | 1ns/div ~ 10s/div (1-2-5increments); ROLL : 250ms/div ~ 10s/div | | Modes | MAIN, WINDOW, WINDOW ZOOM, ROLL,SCAN, X-Y | | Accuracy | ∮0.01% | | Pre-Trigger | 20 div maximum | | Post-Trigger | 1000 div | X-Y MODE | | X-AxisInput | Channel 1 | Y-Axis Input
| Channel 2 | | Phase Shift | ∮3 at 100kHz | SIGNAL ACQUISITION
| | Real-Time Sample Rate | 1GSa/s maximum | Equivalent Sample Rate
| 25GSa/smaximum | | VerticalResolution | 8 Bits | | RecordLength | 25K Dotsmaximum | Acquisition Mode
| Normal, Peak Detect,Average | Peak Detection
| 10ns | Average
| 2 , 4 , 8 , 16 , 32 , 64 , 128 ,256 | CURSORS AND MEASUREMENT | | VoltageMeasurement | Vpp , Vamp , V avg , Vrms , Vhi ,Vlo , Vmax , Vmin , Rise Preshoot/ Overshoot , FallPreshoot/Overshoot | | TimeMeasurement | Freq , Period , Rise Time , FallTime , Positive Width , NegativeWidth , Duty Cycle | DelayMeasurement
| Eight different delaymeasurement | | CursorsMeasurement | Voltage difference betweencursors (V) Time difference between cursors (T) | Auto Counter
| Resolution : 6 digits
Accuracy : ∮2%
Signal Source: All available trigger source except the Videotrigger mode | CONTROL PANEL FUNCTION
| | Autoset | Adjust Vertical VOLT/DIV,Horizontal TIME/DIV, and Trigger level automatically | | Save Setup | Up to 20 sets of measurementconditions | Save Waveform
| 24 sets of waveform | DISPLAY
| | TFT LCD Type | 5.6 inch | DisplayResolution
| 234 (Vertically) x 320(Horizontally) Dots | DisplayGraticule
| 8 x 10 divisions ; 8 x 12divisions (menu off) | DisplayBrightness
| Adjustable | INTERFACE
| | Go/NoGoOutput | 5V Maximum/10mA TTL OpenCollector Output | | RS-232Interface | DB 9-pin male DTE RS-232interface | | GPIB Interface(Option) | Fully programmable with IEEE488.2 compliance | | USB | USB Host/Device 2.0 full speedsupported | POWER SOURCE
| Line VoltageRange
| AC 100V ~ 240V , 48Hz ~ 63Hz ,Auto selection | BatteryPower(Option)
| Battery : 11.1V Li-Ion batterypack
Charge Time : 8 hours (Power ON)
Operating Time : 3 hours , depending on operating condition | MISCELLANEOUS
|
Multi-Language Menu
| Available | | Online Help | Available | | Time Clock | Time and Date, Provide theDate/Time for saved data | | DIMENSIONS &WEIGHT | 254D x 142H x 310W(mm)
Approx. 4.3kg |
选购配件 GTP-060A 示波器探头 10:1 DC~60MHz, 1:1DC~6MHz / GDS-806 Series
|